9
5
I
NSTALLATION INSTRUCTIONS
All local directives, including those relating to national and European standards, must be
observed when installing the stove.
Only an appliance connected by an installer guarantees the observance of the directives on building
construction and fire prevention. This is absolutely necessary for the correct and safe operation of the
stove.
The service life of your stove depends on correct installation, proper operation and regular maintenance.
Distances to be observed around the stove
Flammable materials and objects in the vicinity of the stove must be kept at a minimum distance of 500
mm from the appliance. The minimum distance for combustible objects located above the stove is 250
mm.
If the floor under the stove is made of a combustible material, it is necessary to fit a protective plate on
which the stove can be placed.
The thermostat sensor is used to detect the room temperature and is located on the rear wall of the
stove. We recommend that you check this location. If it is covered or shielded, the ambient temperature
on the thermostat may be read incorrectly and the control may not be carried out correctly.
Make sure that the temperature on the surface of combustibles behind the protective shield does not
exceed 80°C. To reduce the distance from flammable materials, have a protective shield fitted by an
installer.
