Saey SORDO 80 Flatline, Operating Instructions Manual

15

BROKEN WINDOW

 
The pyroceramic window is solidly made and will not crack through heat.  However, it can be 
broken through a lack of care.  Read and apply the tips below to avoid damage. 
 

1.  Never allow logs to protrude from the front or the front log will break the window. 
2.  When filling the stove with logs, make sure than none can roll into the window. 
3.  Do not press unnecessarily hard when cleaning the window. 
4.  When using for the first time check the window tension (new appliance and on initial 

use after the summer). There should be a little play in the window - if not, remove any 
stress before using the appliance for the first time. 

 
If your window does break, consult your installer. 
 

REPLACEMENT OF A BROKEN WINDOW (for the installer)

 
1.  Remove the broken glass from the door. 
 
2.  Lift the replacement window and place it in the top rim of the door, the bottom edge of the 

window falls into the bottom rim of the door. 

 
3.  Push the window from top to bottom against the door seal. 
 
In some cases it may be necessary to completely replace the seal.