SAF-HOLLAND CBX-14, Installation And Operation Manual

8

XL-AS11406OM-en-US Rev E · 2018-04-17 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,  

and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.

Model Identification and Nomenclature

7.  CB-2300 Model Identification

The CB-2300 suspension serial tag is located on the frame 
bracket 

(Figure 10)

.

NOTE:

  If the suspension serial tag is NOT legible or is NOT 

available, you can identify your suspension model 
by the appearance of the equalizing beam. The  
CB-2300 model will have a full cast beam with  
a 5" round axle 

(Figure 10)

.

NOTE:

  This manual applies to the suspension models 

listed on the front cover. However, determine the 
specific model number, write that information 
below and refer to it when obtaining information 
or replacement parts 

(Figure 11)

.

8.  CB-2300 Model Nomenclature

The sample tag illustrated will help interpret the information 
on the SAF-HOLLAND, Inc. serial number tag. The model number 
is on the first line along with the suspension capacity. The 
second line contains the part number and the serial number 

(Figure 11)

.

Figure 11 

Figure 10 

CONSULT SPECIFICATION FOR CAPACITY AND RECOMMENDED APPLICATION.

MODEL NO.

PART NO.

CAPACITY  (LBS)

SERIAL NO.

SAF-HOLLAND, INC.

CB  2300 - 14

Cast Beam Suspension

Axle Capacity
Suspension Series
23,000 lbs.

Ride Height
14" (356mm)
15" (381mm)
16" (406mm)
17" (432mm)

TAG LOCATED ON  
THE FRAME BRACKET