The CFIP Lumina Series Full Outdoor Unit Technical Description and Configuration Guide
•
Rev. 1.3
•
© SAF Tehnika JSC 2010
50
3) In “MS Windows” go to “Control panel
Network Connections”. In LAN “Properties”
find “Internet Protocol TCP/IP” and click on its “Properties” (detailed description is in
Chapter
2.2.3
. Configuration of LAN Ethernet port must be as follows:
4) Go to the remote side Web GUI, choose
“Tools
Configuration file” and press “Cfg
write”.
5) Repeat step 4) for the local side Web GUI.
4.4 Ethernet Configuration
The Ethernet configuration window provides the speed settings for all four LAN ports of
Ethernet switch as well as shows the current status of all four LAN ports (command line
–
ethernet stat
).
Explanation of customization fields:
1. Represents all four LAN (Local Area Network) ports of the CFIP Lumina
switch;
Port 1 and 2 correspond to SFP optical port #1 and #2 (second available for 2-
port optical CFIP Lumina).
Port 3 and 4 correspond to RJ-45 ports #1 and #2 (second available for 2-port
electrical CFIP Lumina).
N
o
(!)
Hybrid CFIP Lumina with both optical SFP and electrical RJ-45 ports will have
LAN Ports 1 and 3 active.