The CFIP Lumina Series Full Outdoor Unit Technical Description and Configuration Guide
•
Rev. 1.3
•
© SAF Tehnika JSC 2010
69
5.2 Performance Management
The main aim of the
performance management
is to register mostly critical device
performance event values in predefined time intervals.
5.2.1 Performance Management Data Collection
The performance parameters are collected within time intervals of 1 min., 15 min. and 1
hour. List reserved space for every time interval is 1440 records (see
Figure 5.6
.).
Second-by-second the input performance event values are stored by updating previous
second values. The register is called
current register
. The
current register
contains the
performance values collected second-by-second from the reset instant to the present second.
At the end of period the contents of current registers are transferred to the history
registers (records), with a time-date stamp to identify the period, after which the current
register must be reset.
Some current register values are passed to the threshold crossing control unit for
triggering threshold crossing notification.
Optionally, the same values are output to the Message Communication Function (MCF)
to be forwarded to the managing system.
Alarm management commands
Command
Description
Alarm cfg
<group ID>
[<global> <led> <aux> <log>
<snmp>]
Allows defining detailed alarm representation settings.
[
<global> <led> <aux> <log> <snmp>
] must be defined in a
row of „1‟s or „0‟s of 5 values for specified group ID with
<group ID>
. „1‟ means the values are „on‟ and „0‟ – „off‟.
Alarm threshold
{stat} |
{<Alarm ID> lo|hi|delta <value>}
Sets threshold values outside which alarm status will be
shown.
