User Guide
(!) The only way to gain access to the web management if you forget the administrator
password is to reset the device to factory default settings.
(!) Default administrator login settings are:
User Name: admin
Password: admin01
2.3.4 System
Log
Use the Configuration | System menu to configure device to save log messages to the
local or remote server using standard syslog facility:
Message level - specify the message level you need to trace. The level determines the
importance of the message and the volume of messages generated by the SAF AP. The
levels are in order of increasing importance [emergency, alert, critical, error, warning,
notice, information, debug]. Default: info.
The SAF AP can be configured to send system log messages to a remote server:
Syslog forward - select to enable remote system logging.
Forward server - specify the remote host IP address or hostname where syslog
messages will be sent.
Forward port - specify the port to which syslog messages will be forwarded [0-65535].
Default: 514.
Forward message level - specify the message level that will be sent to the remote
syslog server. The level determines the importance of the message and the volume of
messages generated by the SAF AP. The levels are in order of increasing importance
[emergency/alert/critical/error/warning/notice/information/debug].
Default: information.
Forward backup - select to enable remote syslog logging backup.
“CFOL Series”, User Guide
© SAF Tehnika A/S 2009
17
