5 Replacement procedure
33
en
XL-SA30000RM-en-DE Rev A • 02.2016 • Errors and changes excluded © SAF-HOLLAND
H
F
G
F
Fig. 65 -
Installing the leading slide bearing and trailing side
bushing
1. Carefully follow the steps below, step 2 and step 3,
to fit the two bearing bushings (F) of the fixed
bearing and spacer (G) as well as the composite
bushing (H) of the floating bearing,
F
G F
Fig. 66 -
Fitting the fixed bearing bushings
2.
To install the two new bearing bushings (F) and
the new spacer (G) on the leading side, assemble
in sequence SAF special tools P/N 4 434 3837 00,
P/N 4 434 3848 00, P/N 4 434 3841 00, P/N 4 434
3889 00 and P/N 4 434 3890 00, preloaded with
.
3.
Once fitted correctly, rotate the threaded tool
clockwise, which will pull into position the two
bearing bushings (F) and the spacer (G).
OK
OK
Fig. 67 -
Correct/incorrect installation of the fixed bearing bushings
4. Stop once the bearing bushings are seated in the
correct position on the inside edge of the bearing
the bearing bushings are seated correctly. How-
ever, overtightening can cause damage.
Caution!
The floating bearing composite bushing must be
aligned correctly when being installed into position
by hand. If not correctly aligned, the slide function of
the brake cannot be guaranteed.
H
Fig. 68 -
Inserting the floating bearing composite bushing
