SAF SI11-22K11, Repair Instructions

2  Safety Precautions

7

en

XL-SA40008RM-en-DE Rev A • 02.2017 • Errors and changes excluded © SAF-HOLLAND

3  General information

3.1  Liability

SAF-HOLLAND's „General Terms and Conditions” 

apply 

► chapter 3.2

.

SAF-HOLLAND accepts no liability claims for per-

sonal injury or material damage with one or more of 

the following causes:

● Failure to observe the proper use 

► chapter 4.2

.

● Failure to observe the repair manual and the 

safety instructions contained in it 

► chapter 4.5

.

● Arbitrary changes or modifications to the product.

● Insufficient maintenance of parts that are subject 

to wear 

► chapter 6.2

.

● The use of any spare parts other than original 

SAF-HOLLAND parts 

► chapter 2.1

.

● Use of damaged parts.

● Disasters due to external influences or force ma-

jeure.

3.2  Warranty and general terms and 

conditions of business

Refer to the “Sales” section of our home page www.

safholland.com for information on current warranties 

and general terms and conditions.

3.3  Environmental protection

All components and consumables used for mainte-

nance and care must be disposed of in an environ-

mentally friendly manner.
Recyclable components must be cleaned of oil and 

lubricants and recycled.
When doing so, you must adhere to the disposal 

instructions for the respective consumables and the 

valid national and regional regulations.

4  Safety Precautions

4.1  Target group

The repair manual of the product is restricted exclu-

sively to use by trained personnel from authorised 

specialist workshops.

4.2  Proper use

The product has been constructed using state-of-the-

art technology and in accordance with recognized 

rules of technical safety. However, its use may result 

in hazards for the operator or third parties or damage 

to the device or other objects of material value.
Proper use also includes:

● Observance of the operating manual and the 

repair manual, as well as implementation of the 

working steps stipulated in the repair manual

● Adherence to the performance limits 

► Fig. 1

 of 

the product

● Adherence to all repair and care instructions, as 

well as additional inspections 

► chapter 6.2

● Use of the auxiliary and operating materials listed, 

as well as their environmentally-friendly disposal 

► chapter 3.3

Operationally safe functioning can only be guaranteed 

if all the instructions, setting and performance limits 

for the product are adhered to.

4.3  Safety instructions and symbols 

used

The following symbols are used to denote particularly 

important information and sections of the text. It must 

be ensured that they are always read and observed 

before working with the product.

Danger!

This safety instruction with the exclamation mark 

warns of a possible safety risk or serious and fatal 

injuries.

Caution!

This safety instruction with the exclamation mark 

warns of possible damage to the product.

Note:

Marking for special user tips and other particularly 

useful and important information for efficient work 

and economical use.