When plugged in, the
endpoint will power on
automatically, boot to the
initial configuration screen,
and attempt to obtain a
temporary DHCP network
address.
4.3
Prepare Remote Control
Insert the (2) AAA batteries in the
remote control.
Insert the RF Remote USB adapter
in the first USB 2.0 port (first from
left on diagram).
* If connecting the endpoint to an
audio amplifier or distribution
system, please contact SAFARI
Montage for available options.
4.4
Initial Configuration
Initial configuration of the SAFARI Montage Endpoint is completed in just a few steps. Simply
connect the endpoint to your network and follow the steps below.
Configure Network Settings
Note that a static IP address is
required.
Using the remote or a
keyboard, press
<Esc>
to
navigate to the endpoint
configuration menu and select
“
Network
”.
Complete network
configuration and click
OK
.
TF
P owe r LED
12V DCIN
