The following safety guidelines apply to your use of the included SAFARI Montage
Endpoint Remote Control:
1. Use only two (2) AAA 1.5 volt batteries for the remote control.
2. Follow the polarity diagram (+ /-) in the battery compartment to avoid the risk of explosion.
3. Do not store or use the remote control near heat sources, at high temperatures or in
direct sunlight.
4. Do not use the remote control in a moist, wet or corrosive environment.
5. Remove batteries before storing the remote control for extended periods.
6. Do not mix old and new or different battery types.
7. Dispose of used batteries responsibly and according to applicable regulations.
8. Do not expose the batteries to excessive heat, as batteries exposed to heat may
explode or leak.
9. Do not attempt to recharge non-rechargeable batteries.
10. Keep the remote control and batteries out of the reach of children.
11. Ensure that the endpoint is oriented to allow reception of remote control signals and avoid
orienting the product such that the IR receiver is directly aligned with fluorescent lighting,
which may cause interference with IR remote signals.
TO AVOID ELECTRIC SHOCK, ONLY OPEN THE REMOTE CONTROL TO
REPLACE THE BATTERIES. THERE ARE NO USER-SERVICEABLE PARTS INSIDE
THE REMOTE CONTROL.