3. Mounting (Optional)
Velcro Mounting Diagram
To mount the device, ensure that the underside of the endpoint is clean, dry and dust-free. Then, peel
away the paper backing from one side of each of the two (2) included hook and loop squares and firmly
apply exposed sticky sides to the recommended locations shown in the diagram above. Press firmly on
the squares for at least sixty (60) seconds. Next, peel away the paper backing from the remaining sides
and affix newly exposed sticky sides firmly to the clean, dry, smooth, non-porous mounting surface of
your choosing. Apply firm pressure for at least sixty (60) seconds before releasing.
•
Use caution when selecting a mounting surface and ensure that mounting is
consistent with all safety precautions and instructions in this manual.
•
Hook and loop squares are not a failsafe mounting method and the endpoint
should not be mounted using the squares on a surface from which the endpoint
could fall if the fastenings were to come loose or otherwise fail. SAFARI Montage
is not responsible for injury to persons or damage to property (including, without
limitation, damage to the endpoint) resulting from failed hook and loops square
mountings or for any other reason should the endpoint fall from your mounting
location of choice.
