background image

blade and the third prong is provided for your safety. If the provided plug does not fit your outlet, 
consult an electrician for replacement of the obsolete outlet.  

7.

 

Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles 
and the point where they exit from the product. 

8.

 

Read and follow all safety instructions in this user manual related to the included remote control, 
including but not limited to the use of batteries within the remote control. 

9.

 

Disconnect this product from the power supply before cleaning, clean with a dry cloth only and do not 
use any cleaning agents or solvents. 

10.

 

Only use the attachments and accessories specified by the manufacturer. 

11.

 

Unplug this product during lightning storms or when unused for long periods of time. 

12.

 

The endpoint must be placed at a distance of at least 10 cm from other equipment that may cause 
electromagnetic interference, such as TV sets or video recorders. 

13.

 

The endpoint can be operated at an ambient temperature of 0°C to +35°C and at a relative humidity of 
10% to 70% (non-condensing). 

14.

 

The SAFARI Montage Endpoint must be installed in accordance with SAFARI Montage’s warranty terms 
with properly conditioned power and surge protection. 

15.

 

All servicing of the endpoint must be referred to SAFARI Montage in accordance with any applicable 

warranty.  
The following safety guidelines apply to your use of the included SAFARI Montage Endpoint 
remote control: 

1.

 

Use only two (2) AAA 1.5 volt batteries for the remote control.  

2.

 

Follow the polarity diagram (+ /-) in the battery compartment to avoid the risk of explosion. 

3.

 

Do not store or use the remote control near heat sources, at high temperatures or in direct sunlight. 

4.

 

Do not use the remote control in a moist, wet or corrosive environment. 

5.

 

Remove batteries before storing the remote control for extended periods. 

6.

 

Do not mix old and new or different battery types. 

7.

 

Dispose of used batteries responsibly and according to applicable regulations. 

8.

 

Do not expose the batteries to excessive heat, as batteries exposed to heat may explode or leak. 

9.

 

Do not attempt to recharge non-rechargeable batteries. 

10.

 

Keep the remote control and batteries out of the reach of children. 

TO AVOID ELECTRIC SHOCK, ONLY OPEN THE REMOTE CONTROL TO REPLACE THE BATTERIES. 
THERE ARE NO USER-SERVICEABLE PARTS INSIDE THE REMOTE CONTROL.

 

 

Summary of Contents for Endpoint






















Reviews: