PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen key
B
A
B
B
B
B
STEP1
OPEN THE ZIPPER ON THE UNDERSIDE OF THE
SEAT AND TAKE OUT LEGS AND HARDWARE
STEP2
PUT THE WASHERS ON THE
SCR
E
W
IN
THE
ORDER SHOWN IN THE PICTURE
STEP3
INSERT THE LEGS AND SCREW IN THE
SCREW
S
BUT DON'T TIGHTEN COMPLETELY.
REPEAT THE SAME STEPS FOR THE OTHER
THREE LEGS
STEP4
CLOSE THE ZIPPER ON THE UNDERSIDE OF THE
SEAT
AND MAKE SURE ALL
LEGS ARE LEVEL, THEN FIRMLY TIGHTEN BOLTS WITH
HW2 HW1 HW3
HW1
HW2
HW3
HW4
STEP5
PUT THE CHAIIR UPRIGHT
ALLEN KEY WHILE THE CHAIR IS UPRIGHT AS
PICTURED ABOVE
(IF THE CHAIR WOBBLY, YOU CAN
EASY ADJUST LEG BOTTOM PLASTIC SCREW)
The legs and hardware are located underneath the
chair
in the zipper compartment.
