PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included):
Allen key
STEP1
OPEN THE ZIPPER ON THE UNDERSIDE
OF THE SEAT AND TAKE OUT LEGS AND
HARDWARE
HW1
HW2
HW4 HW3
HW1
HW1
HW1
HW2
HW2
HW2
BL
BL
BR
BR
BR
CL
CR
HW5
HW5
HW5
HW5
HW5
STEP2
PUT THE WASHERS ON THE SCREW
IN THE ORDER SHOWN IN THE PICTURE
STEP3
ATTACH 1 PIECE OF FRONT LEG(BR) TO THE BOTTOM
OF SEAT(A) BY USING 2 PIECES OF SCREWS(HW1) AND 1
PIECE OF SCREW(HW2) WITH 3 PIECES OF SPLIT LOACK
WASHER(HW3) AND 3 PIECES OF FLAT WASHER(HW4) AS
SHOWN. TIGHTEN ALL SCREWS BY USING ALLEN
WRENCH(HW5) AS SHOWN.
A
STEP4
REPEAT THE SAME STEPS FOR
ANOTHER 1 PIECE OF FRONT LEG(BL). TIGHTEN
ALL SCREWS BY USING ALLEN WRENCH(HW5)
AS SHOWN
STEP5
ATTACH 1 PIECE OF BACK LEG(CR) TO THE BOTTOM OF
SEAT(A) BY USING 2 PIECES OF SCREW(HW1) AND 1 PIECE OF
SCREW(HW2) WITH 3 PIECES OF SPLIT LOACK WASHER(HW3) AND 3
PIECES OF FLAT WASHER(HW4) AS SHOWN. REPEAT THE SAME
STEPS FOR OTHER 1 PIECE OD BACK LEG(CL). TIGHTEN ALL SCREWS
BY USING ALLEN WRENCH(HW5) AS SHOWN.
STEP6
CLOSE THE VELCRO STRIP ON THE
BOTTOM OF THE SEAT(A). ASSEMBLY IS
COMPLETE.
The legs and hardware are located underneath the So
f
a in the zipper compartment
