Step 1
Step2
Make sure all parts could be aligned before assemble
Put the light on a level surface to check
Do not push rotate tubes too hard avoid base screw broken
if everything is stable.
Insert the harp (E) into the saddle (C).
Put the shade(F) on the harp(E),then
tighten the finial (G)into the harp (E)
Insert the bulb(H) into the socket(D).
ENJOY YOUR LAMP
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 100-WATT OR CFL BULB MAX 23-WATT
THERE IS CFL 13-WATT BULB IN THE BOX
