PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 100-WATT OR CFL BULB MAX 23-WATT OR LED BULB MAX 12-WATT
THERE IS LED 9-WATT BULB IN THE BOX
Step 1
Step 2
Step 3
Make sure all parts could be aligned before assemble
Put the light on a level surface to check
Unpack all parts from cartons carefully.
Put the shade(J) on the socket(I),then
if everything is stable.
Through Iron sheet(B) and Gasket(F),Insert Lamp body(C)
tighten the out ring(K) on it.
into Lamp base(A),Fix the nut(F) on bottom of base(A)
Insert the bulb(L) into the socket(I).
by using spanner(H)
Screw the Lamp Body(D) into the Lamp Body (C ),
Screw the Lamp Body(E) into the Lamp Body (D ),
Be careful not to twist the power cord and tighten securely
ENJOY YOUR LAMP
