PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 100-WATT OR CFL BULB MAX 23-WATT OR LED BULB MAX 12-WATT
THERE IS LED 9-WATT BULB IN THE BOX
1
2
3
Step
Step2
Step3
Make sure all parts could be aligned before assemble
Insert the Harp (E) into the Saddle (D).
Put the light on a level surface to check
Do not rotate lamp body too hard avoid base screw broken
Put the shade(F) on the Harp(E), then
if everything is stable.
Screw the Lamp body (B1) onto the Lamp base(A)
tighten the Finial (G) into the Harp (E)
Screw the Lamp body (B2) onto the Lamp body (B1)
Insert the bulb(H) into the socket(C)
Screw the Lamp body (B3) onto the Lamp body (B2)
Screw the Lamp body (B4) onto the Lamp body(B3)
Screw the Lamp socket (C) onto the Lamp body(B4)
Be careful not to twist the power cord and tighten securely
ENJOY YOUR LAMP
