D
F
C
A5
A4
A3
A2
A1
Step 1
Step2
Step3
Pull cord through lamp base(A1) to tighten stem connections,
Insert the bulb(F) into the socket(G).
Put the light on a level surface to check
make sure the screw nut at the bottom of the lamp is tightened.
if everything is stable.
Fasten tube(A2) onto base(A1), fasten tube(A3) onto
tube(A2), fasten tube(A4) onto tube(A3), fasten column(A5)
onto tube(A4),Insert the Harp (C) into the Saddle (B),Put the shade(D)
on the Harp(C),then tighten the Finial (E)into the Harp (C)
B
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 100-WATT OR CFL BULB MAX 23-WATT
THERE IS CFL 13-WATT BULB IN THE BOX
ENJOY YOUR LAMP
E
1
1
1
2
3
