1 / 3
CAUTION:
Read instruction carefully and turn electricity off at main circuit breaker panel
before
beginning installation.
Assembly Instruction
ITEM#:PND4012A
Care and Cleaning
To clean the outside of the fixture, use a dry or slightly dampened clean cloth(use clean
water, never a solvent)to wipe the surface of the fixture.
water, never a solvent)to wipe the surface of the fixture.
To clear the inside of the fixture, first disconnect power to the fixture by turning off the circuit
breaker or by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean
cloth(use clean water, never a solvent) to wipe the interior surface of the fixture
Do not use any cleaners with chemical, solvents or harsh abrasives. Use Only a dry soft cloth
to dust or wipe carefully.
to dust or wipe carefully.
Estimated Assembly Time:30 minutes
Part List and Hardware List
PIECE
DESCRIPTION
PICTURE
QUANTITY PIECE
DESCRIPTION
PICTURE
QUANTITY
PIECE
DESCRIPTION
PICTURE
QUANTITY PIECE
DESCRIPTION
PICTURE
QUANTITY
A
mounting screw
2X
F
ground screw
1X
B
mounting bracket
1X
G
canopy
1X
C
machine screw
2X
H
tube
12" - 2X
6" - 2X
D
wire connector
3X
I
ring nut
1X
E
screwed ball
2X
J
bulb
5X
1 / 3
