5390-37: 4 of 4; Rev. 3: 11/04
Safco Products Company, New Hope, MN 55428
Insert six O Shelf Glide Push Pins into the small holes
on the insides of the Side Panels and each side of the
Vertical divider.
Next install the six N Plastic Shelves: guide the back
of each Shelf onto the Push Pins, tilt the Shelf enough
to start the Shelf moving, and lower the shelf to push it
all the way into position.
8
Place the P Plastic Bins into the
upper compartment so the side
handles rest on top of the Rails.
Insert your file folders into the Bins.
9
Raise the B Left Side Panel and guide the
posts and dowels into the holes on the
exposed edges. Gently tap the Side Panel to
seat the dowels. Use a screwdriver to fasten
the Cams by turning them clockwise until they
stop.
7
ASSEMBLED UNIT
P
N
B
O
