A
B
C
D
E
MODEL NUM-
BER
4158
100415837: 1 of 1; Rev A; Rev Date 09-AUG-2016
PanelMate
®
Dry-Erase Board
For questions or concerns, please call
Safco Consumer Hot Line 1-800-664-0042
available Monday-Friday 7:30 AM to 5:00 PM (Central Time)
(English-speaking operators)
ASSEMBLY INSTRUCTIONS
Safco Products Company, New Hope, MN 55428
PART NO.
Frame 1
4158-01
Tray
1
4158-02
White
Board
1
4158-03
Wire
Hangers
2
4158-04
Hanger
Tips
4
4158-08
LETTER
CODE
DESCRIPTION
QTY.
PARTS LIST
ASSEMBLED UNIT
WARNING:
Use ONLY
Dry-Erase Markers
on the White Board
surface.
C
B
E
D
Remove E Hanger Tips from the bottoms of D
Wire Hangers as shown below. Insert each wire
hanger into the two built-in clamps on each side by
gently pressing the clamp tabs down until the hang-
ers are in position. Replace the Hanger Tips onto the
bottoms of both of the
Wire Hangers.
1
Hang the Dry-Erase Board onto your of
fi
ce panel
wall unit. Adjust the position of your Dry-Erase Board
on your wall by grasping the unit in both hands with
the back side facing away from you. With two
fi
ngers
of each hand simultaneously press the four clamp
tabs in and slide the unit up or down wire hangers to
the desired position, then release
the clamp tabs.
2
BACK VIEW
Hanger
Tips
Clamp Tabs
Clamp Tabs
A
