5.Ensure that the power cable is neatly tucked
into the roof of the car, along the rubber tubing
along the side of the door and under the lower
part of the dashboard to the fuse box. This will
ensure that there are no loose wires in the
vehicle from the dash camera to the power
supply.
6.Pay attention to the direction of the wiring when
installing the rear camera. The wiring can be
concealed in the roof or rubber tubing of the
vehicle. Affix the rear camera to the rear
windscreen or just beneath the boot lid
depending on your vehicle type. The rear
camera is connected via the AV-IN cable to the
main unit. There is no need to connect the red
reversing wire on a no screen dash camera.
