Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2021 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608, 10501022 AND OTHER PATENTS PENDING
4
CSU-3210
SERIES ASSEMBL
Y
INSTR
UCTIONS–UPRIGHT ASSEMBL
Y
Install Hinge Pin and
Retain Ring as shown.
Attach to vehicle wall as
shown below.
4
6
Repeat Steps 3 and 4 to install
the lower Shelf.
5
Upright feet are
customizable for drilling
locations and positioning.
Install hardware accoring
to your vehicle OEM.
7
The Shelving Lock
in engaged when
shelving is open, to
disengage and close
Shelving, slide lock in
and up as shown.
Refer to your
Cantilever Shelving
Mounting Assembly
Manual to mount
shelving to your
vehicle.
8
USAM-CSU3210SERIES-US01 Rev-B 0421
