SAFE TRON ML 128, Manual

CABLE RECOMMENDATIONS

Cable types like data / telecom / signal (single core) with areas between 0.1-0.2 mm may not be used to 

supply power to the lock. Warranty is void if installation instructions are not followed.  

Recommended minimum cable area between the power supply–control unit-lock cases (total length)

N.B.

It is essential that the power supply to the control unit has a correct dimensioned cable, this to avoid a voltage drop

that interferes with the function of the lock.

At common supply of several locks / access control / reader / centers and the like, the total

power consumption is taken into account when calculating the cable area.

Cable length

12-24 VDC

0-10m

0,17mm²

11-20m

0,34mm²

21-40m

0,68mm²

61-80m

1,36mm²

81-100m

1,7mm²

RECOMMENDATIONS WHEN INSTALLING MOTOR LOCKS

Recommendations when installing motor locks

• Read and follow the installation instructions.

• In cases where double cylinder is not used, a magnetic thumb turn should be used. This is to ensure

  that the position of the cylinder will not block the deadbolt.  

• Motor locks should to the greatest extent be used electrically for best performance.

  Manual locking/unlocking with a key should therefore be minimized.

• Maintenance e.g. adjustment and lubrication 

should only be performed by a trained professional.  

EN