13
UK - SC 809
Step by step installation guide
To permanently remove
Use a blunt knife to carefully prise the Corner
Protector off of your furniture, and rub away
any residual adhesive with your fingers.
Please keep the blunt knife out of reach of
children.
SAFE SecureHold™ adhesive is instantly
strong. It cannot be repositioned when placed
incorrectly so test each step first, without
exposing the adhesive.
Before installation, clean and dry the surface
with a 50:50 solution of water plus white
vinegar or surgical spirit.
Peel off the protective layer on one side of
the Adhesive Pad (B) to expose the adhesive.
Position the Adhesive Pad on the underside
of the Corner Protector (A) and press down to
stick in place.
Peel back the remaining protective layer on
the Adhesive Pad.
Fit the protector to the corner of your table.
30s
Hold it in position for 30 seconds.
24h
Repeat steps 2-6 for the underside. Leave for
24 hours to ensure maximum adhesion.