Safe SureCatch Adhesive Top Drawer Lock, User Manual

3

UK

What’s included:

  (A) 1 x SAFE EZ-Tool™
  (B) 2 x Catch
  (C) 2 x Arm

Recommended usage

Use on top drawers or cupboards where the inside of the cabinet above 
the drawer is flat. Worktops can overhang the drawer unit by up to 20 
mm. If using a drawer insert to tidy cutlery etc. you will need a mini-
mum of 40 mm space between the top of the insert and the top of 
the drawer.

Step by step installation guide

Slide the EZ-Tool™ (A) onto the 
Catch (B). The broad plate at the 
end of the EZ-Tool™ fits into the 
recess on the adhesive side of 
the Catch.

stop tab

removal tab

back plate

SAFE SecureHold™ adhesive is 
instantly strong. It cannot be repo-
sitioned when placedincorrectly so 
test each step first, 

without

 expo-

sing the adhesive. Before installati-
on, clean and dry the surface with a 
50:50 solution of water plus white 
vinegar or surgical spirit.

Place the EZ-Tool™ and Catch 
onto the Arm (C) so that the 
locator pin fits into the hole on 
the top of the Arm.

Remove the protective layer to 
expose the adhesive strip on 
the Catch.

Open the drawer and hold 
the stop tab of the EZ-Tool™ 
diagonally against the overhang 
of the worktop.

stop tab