NXP Semiconductors
UM11637
FRDMGD3160DCMHB evaluation board
Register map
•
Registers are grouped according to function; independent lines to read and write the
registers
•
Individual registers can be read by clicking the R button and can be written by using the
W button.
•
Copy button to copy the read values to the write line; can be set to copy automatically
•
Reset button to undo the changes on the write line and reset to the previous value
•
Global register controls perform the selected command on all registers with the
checkbox selected.
Figure 26. Register map
UM11637
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2022. All rights reserved.
User guide
Rev. 2 — 3 February 2022
30 / 42
