background image

11

NOTE!

Lock the swivel wheels manually. Protect the 

chassis cover and fasten the lift chassis to the 

pallet with at least 2 straps so that it is firmly 

anchored. Do not overtighten the straps as this 

may damage the plastic cover of the chassis.

emergency stop button to turn off the power. Rotate the emergency 

stop button clockwise to reactivate the power.

6.8  Emergency lowering (19)

The lift is equipped with an emergency lowering system. Emergency 

lowering of the platform is done with a switch that is located on the 

lift chassis control panel.

6.9  Transport of the lift with a lifting crane

Make sure that the lift is anchored and cannot tip over or come 

loose when lifted.

6.10  Transport of the lift with a forklift

6.11  Transport of the lift by truck / trailer

•  The lift must be firmly anchored to a pallet during transport by 

truck / trailer.

•  The lift must be in the lowered position during transport.

•  Cover the lift to protect it from dirt and moisture.

•  Load-proof the lift on the truck / trailer.

WARNING!

If the platform can’t be lowered, NEVER climb the mast. Ask 

someone on the ground to turn on the emergency lowering 

button to lower the platform. Keep a safe distance to the mast 

when the emergency lowering is activated.

WARNING!

Lifting with forklift is only for transport of the lift. Must never be 

used to increase the lifting capacity. Check the weight of the 

machine in the specifications and make sure the forklift truck 

has a sufficient lifting capacity to lift the machine. The arms of 

the forklift are placed under the machine from the side.

Summary of Contents for PushAround PA35





















Reviews: