background image

7

Never increase the height of the platform by using stairs or 

ladders etc.

The lift may only be used indoors on flat and solid surfaces that 

are suitable for the load of the lift.

The lift must not be used as a crane.

The lift must not be exposed to liquids, humid environment or a 

temperature below 0 °C.

Risk of falling

NEVER climb, sit or stand on the platform railing. If the platform 

cannot be lowered, NEVER climb down the mast. 

Electricity

This machine is not isolated against electric current. It is 

therefore necessary to have a correct safety distance to the 

high-voltage conductors or other current carrying objects.

Always lock the swivel wheels to prevent the lift from 
being moved unintentionally!

Automatic locking of the front wheels occurs when the platform 

is raised.

Risk of crush injury

To prevent crush injuries, make sure that people or other 

equipment are not within the lift’s working area. Observe the 

danger signs that are placed on the lift.

Make sure that the safety gate is closed when using the 

platform.

Make sure that the operator uses appropriate safety equipment.

WARNING!

Do not stand under the platform when this is being secured in 

the raised position or when it is removed.

Summary of Contents for PushAround PA35





















Reviews: