13
© 2010 SafeLine and all the SafeLine products and accessories are copyrighted by law.
Programming
ENGLISH V. 4.02
See the Programming methods chapter before reading this example to see how to get started.
The example will assign the following settings to the SafeLine:
Set ID code for P100 protocol to 12345678.
Set fi rst phone number to emergency call centre to 42345687.
Set second phone number to emergency call centre to 45645687.
Set phone number 42345687 for test alarm.
Send test alarm every third day.
Set test alarm protocol to P100.
Set alarm button delay to 10 seconds.
PROGRAMMING EXAMPLE
1.
Start programming:
2.
Enter P100 ID code:
3.
Enter the fi rst telephone number:
4.
Enter the call type for fi rst telephone
number:
5.
Enter the second telephone number:
6.
Enter the call type for second
telephone number:
7.
Telephone number to test-alarm
receiver:
8.
Enter number of days between test
alarm:
9.
Set test alarm protocol to P100:
10.
Enter alarm button delay:
11.
End programming:
