41 INSTALLING NETWORK HASP
HASP Keys
Installation and Configuration Guide
On the
Sentinel Keys Available on [computer_name]
page you will see a list of keys which are currently
connected to network (including local keys). Make sure the network HASP you have installed is in this list
In the
Location
column, make sure the value for this key is
Local
.
Figure 49:
Sentinel Keys Available on
page
In the
Actions
column (Fig. 49), you have buttons to view the details:
Products
: shows a list of products licensed with this key.
Features
: shows the details of features and components licensed with this key.
Sessions
: shows open session details for the key in question.
The
Blink on/off
button allows to enable or disable hardware key LED indicator. This option may come in
handy in case multiple hardware keys are connected to the computer.
4.5.2
Configuring Remote User Access
In case you need to configure Sentinel License Manager remotely, before doing so, perform the following
steps on each client computer:
1.
2.
Once in the Sentinel Admin Control Center, select
Configuration
(Fig. 50).
3.
On the
Basic Settings
tab, check
Allow Remote Access to ACC
.
4.
Click
Submit
.
Once you have performed all of the above, you can access Sentinel License Manager from any computer
within the network.
