Safer 90942, Instruction Manual

20

GB

amperes and the welding method in order 

to achieve optimal protection.

Sensitivity

The welding helmet’s sensitivity to light can 

be variably set using the Sensitivity button 

(6).
If the welding current is low, set the 

Sensitivity button to a high position 

(towards HI) so that the welding helmet can 

register a weak stable electric arc.
If the welding current is high, set the 

Sensitivity button to a low position (towards 

LO) to avoid interference.

Delay time

The welding helmet’s delay time can be 

variably set using the Delay button (7).
If the welding current is high and the light 

from the molten bath is very strong, adjust 

the Delay button to a high position (towards 

MAX) to avoid the glass being aff ected by 

the light from the molten bath.
If you are spot welding, set the Delay button 

to a low position (towards MIN) to increase 

the work effi  ciency.
When the button is in the centre position, 

the setting is suitable for most welding 

tasks.

Use

Remove the protective � lm from both sides 

of the visor (4). Check that there is no dirt on 

the sensor on the front of the visor.
Place the welding helmet on the head. 
Adjust the neckband (1) and headband (2), 

so the helmet sits securely on the head. 
Adjust the angle of the visor using the knob 

(3) to ensure good vision. 
Adjust the level of dimming using the 

button (5) to ensure it is suitable for the 

current task. 
The higher the number the button is 

adjusted to, the darker the visor will be. 

Cleaning

Wipe the welding helmet with a well-wrung 

damp cloth. Do not use harsh or abrasive 

detergents, as these may damage the visor 

and helmet.
When not in use, the welding helmet should 

be stored in a dark, dry location.

Service centre

When not in use, the welding helmet should 

When not in use, the welding helmet should 

be stored in a dark, dry location.

be stored in a dark, dry location.

Note: Please quote the product model 

number in connection with all inquiries. 

The model number is shown on the front of 

this manual and on the product rating plate.
For:
•  Complaints
•  Replacements parts
•  Returns
•  Guarantee issues
•  Open weekdays from 8.00 to 16.00 

(Fridays until 15.30)

•  E-mail: service@hpschou.com