11
10
5. TROUBLESHOOTING
If the light panels
❽
are lit red, the appli-
ance is faulty. Press the OK button
❷
to
find out the problem type by the indicator
lights:
Light panels
❽
blinks blue:
• Blinks once: Problem with wireless con-
nection.
• Blinks twice: Problem with power control
unit
Ⓒ
.
• Blinks three times: Power control unit
Ⓒ
over-heating.
Light panels
❽
blinks yellow:
• Blinks once: Probem with sensors
❻
.
• Blinks twice: Problem with sensor unit
Ⓐ
• Blinks three times: Faulty installation po-
sition of the sensor unit
Ⓐ
: see remedy on
the table below.
Light panels
❽
blinks red:
• Blinks
once
: The service life of the ex-
tinguisher unit
Ⓔ
is full.
Please contact
your vendor or SAFERA product sup-
port.
.
• Blinks
twice
:
The extinguisher unit
Ⓔ
or its connection cable is faulty.
• Blinks
three times
:
The extinguisher
unit
Ⓔ
is empty
.
Light panels
❽
blinks purple:
• Blinks
once
: Connection hub
Ⓕ
is or its
connection cable is faulty.
• Blinks
twice
: Connection hub
Ⓕ
failure
• Blinks
three times
: The power supply
Ⓓ
is faulty.
Please contact your vendor support if you cannot solve your problem with these instruc-
tions:
Problem
Remedy
Cooker cannot be
switched on
Check whether the child proof lock is active. The lock stops
the use of the cooker. For instructions, see chapter 3.2.
The appliance repeatedly
gives false (the warning
light for cooktop hazard
❺
is on).
Test the working order according to installation manual step
6/6.
If the appliance is in working order, but the Stove Guard
gives repeatedly false alarms, you may adjust the alarm limit
of the appliance. See installation manual step 5/6.
The appliance repeat-
edly gives false alarms,
especially when the oven
is in use.
There may have been a mistake in the calibration of the ap-
pliance. See installation manual step 3/6.
The indicator light for nor-
mal activity
❹
does not
blink every five seconds.
There may be a problem with the power supply
Ⓓ
.
Ensure that the power supply
Ⓓ
is connected correctly to
the wall socket and that the socket has power. If the problem
is not solved, remove the Stove Guard from the electrical
network and contact your vendor.
The appliance repeatedly
gives out water leakage
alarms.
For instructions, see chapter 3.4.
If the alarms recur, take off the fuses for the cooker and the
oven. Check that the leakage sensors are correctly con-
nected. Put back the fuses.
The light panels
❽
are lit
purple.
The Stove Guard is waiting for installation. See installation
manual.
6. WARRANTY
The appliance comes with a 24 month warranty as regulated in the general warranty terms
of SAFERA.
