Page 19
0403
5.3
INSTRUCTIONAL SIGN AND ITS MARKINGS
Each SafeRail ladder and Vertical SafeRail-safety rail is also equipped with a separate instructional sign.
The instructional sign must be installed in such a manner that it is easy to spot and clearly visible to the user
before using the system.
The instructional sign includes the following markings:
•
Installation month and year. The installing party is responsible for adding this information on to the
sign
•
Reminder to check the condition and functionality of the SafeRail-fall arrest system and the SafeRail
Carriage-safety carriage before use
•
Instructions for the user having to use a full-body harness and a SafeRail Carriage-safety carriage
(MM 401) while using the SafeRail-fall arrest system
•
Symbol urging the use a full-body harness
•
Reminder to read the user instructions
•
Standard number (EN 353-1:2014 + A1:2017)
•
CE body identification number (CE-0403)
•
SafeRail trademark
•
Name and address of the manufacturer (MM Materials Oy, Peuraniitty 5 B 27, FI-02750 Espoo,
Finland)
6.
COMMISSIONING AND PERIODIC INSPECTIONS
The commissioning and period inspections may only be carried out by the manufacturer, or another person
or body authorized by the manufacturer. An inspection report must be produced for each inspection, in which
the type of inspection, any observations made during the inspection as well as potential further measures,
and the date of the next planned inspection are recorded. A template for the inspection report can be found
on pages 21
–22.
If any deviation, unusual wear, or reduction of spring force of the SafeRail Carriage-safety carriage is
observed during inspection or use, the system must immediately be decommissioned. If the observed
Summary of Contents for MM 111
Page 1: ...INSTALLATION MANUAL...
