Page 3
I INSTALLATION INSTRUCTIONS FOR THE SAFERAIL FALL ARREST SYSTEM
The SafeRail fall arrest system and the SafeRail Carriage-safety carriage ensure safe ascent and descent
through its built-in fall arrest feature. The system is designed to be used on vertical structures.
Using the system for any other purposes than those specified by the manufacturer is forbidden.
If the product is sold outside of Finland, the reseller must deliver the installation and user instructions of the
SafeRail-fall arrest system in the language of the country in question.
1.
BEFORE INSTALLATION
Read the installation instructions carefully and ensure that you have the appropriate tools and safety
equipment required available for the installation. Also make sure that the necessary preparations and work
safety measures have been carried out before you begin the installation.
2.
INSTALLATION OF THE SAFERAIL LADDERS
– SINGLE STEP, TWIN STEP, AND
HANDRAIL LADDER MODELS
Each SafeRail ladder model is based on the Vertical SafeRail MM 101 (safety rail).
2.1
FORBIDDEN METHOD OF INSTALLATION
•
It is strictly forbidden to install the SafeRail ladders at a negative angle of climb.
2.2
INSTALLATION DIRECTION
•
The installation must always begin at the top, proceeding down.
•
The topmost SafeRail ladder section must consist of a complete element (3000 mm or 5700 mm).
Both ends of the ladder element must be equipped with factory-prepared holes.
Single Step Ladder MM 111
Twin Step Ladder MM 112
Handrail Ladder MM 121
Summary of Contents for MM 111
Page 1: ...INSTALLATION MANUAL...
