SafeSmart Access ADJUSTASTAIRS Instructions - Safety, Assembly & Operation Download

Page: 1 / 6

00MM

IDE

DJUSTA

TAIRS

INSTRUCTIONS – SAFETY, ASSEMBLY & OPERATION

PORTABLE STAIRS

www.safesmartaccess.com

CALL +1 (310) 410 1525

Users of

Safesmart Access

AdjustaStairs

please read the

following instructions carefully and do not use the stair until
the instructions have been read and understood.
The

AdjustaStairs

is designed and manufactured to the

requirements of and

AS/NZS 1576:1-2010 & 3-2015.

Any operator expected to use or install the Stair should have
received training in its safe use and have conducted a risk
assessment prior to use.
There is further general information on safe working at
heights in the following websites:

www.workcover.nsw.gov.au

& www.dol.govt.nz/worksafe/

SafeSmart USA
13238 Florence Ave
Santa Fe Springs
CA 90034
PHONE +1 (310) 410 1525

www.safesmartaccess.com

Summary of Contents for ADJUSTASTAIRS







Search results

Summary of Contents for ADJUSTASTAIRS

Reviews:

Related manuals for ADJUSTASTAIRS

Brands by name

Popular brands

SafeSmart Access ADJUSTASTAIRS, Instructions - Safety, Assembly & Operation

Search results

Summary of Contents for ADJUSTASTAIRS

Reviews:

Related manuals for ADJUSTASTAIRS

Brands by name

Popular brands