ASSEMBLY INSTRUCTIONS
Assembly Instructions - Safespace Hi-Lo
1
IMPORTANT!
READ and FOLLOW these instructions carefully.
Review all instructions before beginning assembly.
These instructions are provided to avoid problems that may occur from
improper assembly or installation.
1
Inserting the Foam
Roll out the
PVC fabric
and position it with the floor facing up and mesh side facing
down.
Place the
closed-cell foam
on top of the
PVC fabric
and aline the
*
with the
*
on
the inside of the PVC cover.
This ensures the foam will fit in at the
right angle.
Fully open the floor zip on the PVC fabric
and place the foam inside the zip pocket,
making sure it fits snug into the corners.
Once fully fitted, close the zip and push
the zip puller inside the fabric to conceal it.
Turn the Safespace over so the mesh side is now facing up.
2
Inserting the Horizontal Bars
Identify the 4x
horizontal bars (long)
and 4x
horizontal bars (short)
. The long bars
are for the longer sides and the shorter bars are for the shorter sides of the
Safespace.
