ZY INTERNATIONAL LIMITED
GPSTrackerManual
6
violently and keep it off fire.
b:
Please charge the battery in time to keep it working normally.
5.3 Startup
l
Put the SIM card and battery in place.
l
Turn on the unit
outdoors
by pressing the
“
on/off
”
button until the indicator is on.
l
For first use, please initialize the unit and restore it to default setting.( please refer to
5.4
for
instruction.)
l
In 10 or 40seconds, the unit will begin to work and acquire the GSM signals as well as the
GPS signals. The indicator will keep flashing every 4 seconds when the unit has received
the signals, otherwise it will keep on.
l
When this unit receives GPS signals normally, you can use it and do all the following
settings.
5.4 Initialization
Send
“
begin+password
”
in SMS to the unit, it will reply
“
begin ok
”
and initialize all the
settings. (default password: 123456)
5.5 Change the password
Send SMS pold pspace+new password to change the password.
Remark:
5.5.1 Be sure keep the new password in mind, you have to upload the software to restore the
original setting in case of losing the new password.
5.5.2 Make sure the new password is in 6 digits, or else the tracker can not recognize the
password.
