background image

PROPRIETARY INFORMATION 

The material contained herein constitutes proprietary and confidential information, and is the intellectual 

property of 

SAFETRAN SYSTEMS CORPORATION

 protected under United States patent, copyright and/or 

other laws and international treaty provisions. This information and the software it describes are for authorized 

use only, and may not be: (i) modified, translated, reverse engineered, decompiled, disassembled or used to 

create derivative works; (ii) copied or reproduced for any reason other than specific application needs; or (iii) 

rented, leased, lent, sublicensed, distributed, remarketed, or in any way transferred; without the prior written 

authorization of 

SAFETRAN SYSTEMS CORPORATION

.  This proprietary notice and any other associated 

labels may not be removed.  

 

TRANSLATIONS 

The manuals and product information of

 SAFETRAN SYSTEMS CORPORATION

 are intended to be 

produced and read in English. Any translation of the manuals and product information are unofficial and 

can 

be imprecise and inaccurate in whole or in part. 

SAFETRAN SYSTEMS CORPORATION

 does not 

warrant the accuracy, reliability, or timeliness of any information contained in any translation of manual or 

product information from its original official released version in English and shall not be liable for any losses 

caused by such reliance on the accuracy, reliability, or timeliness of such information.  Any person or entity 

who relies on translated information does so at his or her own risk. 

 

WARRANTY INFORMATION 

SAFETRAN SYSTEMS CORPORATION

 warranty policy is as stated in the current Terms and Conditions of 

Sale document.  Warranty adjustments will not be allowed for products or components which have been 

subjected to abuse, alteration, improper handling or installation, or which have not been operated in 

accordance with Seller's instructions.  Alteration or removal of any serial number or identification mark 

voids the warranty. 

SALES AND SERVICE LOCATIONS 

Technical assistance and sales information on 

SAFETRAN

 products may be obtained at the following locations: 

 

SAFETRAN SYSTEMS CORPORATION

 

 

SAFETRAN SYSTEMS CORPORATION

 

2400 NELSON MILLER PARKWAY

 

 

CALIFORNIA DIVISION

 

LOUISVILLE, KENTUCKY  40223

 

 

10655 7th STREET

 

TELEPHONE:

 

(502) 618-8800

 

 

CUCAMONGA, CALIFORNIA 91730

 

FAX: 

 

(502) 618-8810

 

 

TELEPHONE:

 

(909) 532-5300

 

SALES & SERVICE: 

 

(800) 626-2710

 

 

CUSTOMER SERVICE: 

(800) 793-7233

 

WEB SITE: 

http://www.safetran.com 

 

TECHNICAL SUPPORT: 

(800) 793-7233

 

 

 

 

FAX: (909) 

532-5400 

 

Safetran

®

 is a registered trademark of Safetran Systems Corporation. 

 

Summary of Contents for 3000 GCP












Reviews: