The SABRE is available as an INLINE or a
RELAY device. Both products make it easy
to upgrade any existing access control
system with mobile access, without giving
up support for physical access cards.
When connected between a host reader
and a physical access control panel, the
SABRE enables mobile devices and
wearables to be used as a replacement or
in-conjunction with existing card
technologies.
The SABRE INLINE and the SABRE RELAY
sensors contain onboard Wi-Fi which
permits two-way communication with
the Credential Manager for OTA remote
management and configuration.
The SABRE RELAY is an extension of the
INLINE device with additional access
controller management capabilities. The
RELAY is ideally suited for parking
garages, remote buildings and single door
offices where no existing cabling or reader
infrastructure exists. If you order the
SABRE INLINE it will come without the
relay section of the board.
Introduction
a) INLINE or RELAY Sensor
SABRE INLINE/RELAY Quick Start Guide
| 2
In the box
01
Product Overview
02
Included
b) Wiring
c) 7 1/8 in Solid and Stranded Wire
Stripper
d) Insulation Displacement Connector,
Moisture Resistant, 300 V Max
e) Screwdriver
Not Included (Required)
a)
b)
c)
d)
e)
www.safetrust.com
All manuals and user guides at all-guides.com
