PLEASE READ THE FOLLOWING WARNINGS AND ALL ASSEMBLY
INSTRUCTIONS CAREFULLY BEFORE USING THE QUICK
CONNECTION TWO WAY MONITOR. KEEP THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
TERMS USED IN WARNINGS:
The term “Receiver” corresponds to “Parent
Unit” and the term “Transmitter” corresponds to “Child Unit” in the rest of this
instruction booklet.
• The Quick Connection Two Way Monitor is not intended to replace
responsible and proper parental supervision.
• Check your child’s activity at regular intervals as this monitor will not alert
parents to the silent activities of a child.
• Before using your Quick Connection Two Way Monitor:
- Read and follow all instructions carefully.
- Read and observe all warnings on the product and in this
instruction booklet.
• To prevent entanglement with the adapter cord,
NEVER
place the
cord in or near a crib or playpen.
DO NOT
place the Receiver anywhere its
AC adapter cord are within reach of children.
•
ALWAYS
KEEP THE TRANSMITTER, RECEIVER AND AC ADAPTERS
OUT OF REACH OF CHILDREN.
• This product is not intended to be used as a medical monitor and its
use should not replace adult supervision. It is important that an adult
stay within the viewing range of the Quick Connection Two Way Monitor at
all times during use.
• It is essential to check reception regularly. Please see the Testing
Reception section for complete instructions.
• The Receiver is intended for indoor use only.
•
NEVER
use the Transmitter or Receiver near water. For example, do not
use near a bathtub, bathroom sink, laundry tub, kitchen sink, in a wet
basement, etc.
• Always unplug the AC adapters from wall outlets during long periods
of non-use.
• Position the Transmitter, Receiver and AC adapters to allow adequate
ventilation and prevent these components from overheating.
• To prevent overheating, keep the Transmitter, Receiver and AC adapters
away from heat sources such as radiators, heat registers, stoves or other
appliances (including amplifiers) which produce heat. Also keep these
components out of direct sunlight.
• Use only the AC adapters provided. Use of any other adapters may
damage the Transmitter and/or Receiver. Plug the AC adapters into
standard household current only (120V AC outlet)! To prevent
entanglement and overheating,
DO NOT
use extension cords.
• The AC adapters may become slightly warm to the touch during operation.
This is normal.
• Position the AC adapter cords so that they are not walked on or pinched by
items placed upon or against them, paying particular attention to cords at
AC adapter plugs, wall plugs, and the point at which the cords attach to the
Transmitter and Receiver.
WARNING
2
08041 Quick Connection 10/9/03 11:25 AM Page 2
