This child restraint has 3
recline positions when
used with the base:
upright, semi-reclined
(Forward-facing only) and
reclined.
Rear-Facing - Must be
fully reclined.
Forward-Facing - Semi-
reclined or upright.
Belt-Positioning Booster - Must be fully-upright.
19
Removing Your Child from the
Child Restraint
Press on release button and
pull apart.
1
3
Loosen harness by pushing
down on the harness
release lever while pulling
out on the harness. Remove
child.
For either style “A” or
“B”, press red button on
buckle to release the
buckle plates. Place
harness over sides of child
restraint.
A
B
2
18
Reclining the Child Restraint
To fully recline, pull out on
handle and push top of
child restraint back.
For upright position, pull
out on handle and pull
child restraint up.
1
2
Install Cup Holder
(on select models)
Pull pad off corner. Hook
bottom of cup holder to
edge of shell. Rotate cup
holder up until tab on cup
holder snaps into hole on
shell. Replace pad.
4358-3410D Alpha 5pt 1/26/06 11:39 AM Page 21
