Lift up to
loosen
To loosen;
Lift up on top
anchorage lock and push
lock toward top
anchorage hook.
To tighten;
After the
child restraint is locked
into place with LATCH or
vehicle belt, put knee in
child restraint and push
down. Pull on free end
of top anchorage strap
(tether).
Pull loose
end to
tighten
To Adjust Top Anchorage Strap (tether):
51
F. Installing Forward Facing
NOTE:
Loosen or remove the top anchorage strap (tether)
form the storage location when changing the recline
position.
F-3
Preparing to Install
LATCH Forward Facing
Routing LATCH Belt
Insert the LATCH hook
that has the adjuster
closest to
it, through the
forward-facing belt path.
NOTE:
You may need
to raise the headrest to
thread the LATCH belt.
1.
Thread LATCH Across
Pull the LATCH hook
across the back and out
the other side as shown.
Make sure the belt is not
twisted.
2.
NOTE:
Pull the LATCH belt out of the rear-facing belt path if you
have used this child restraint rear facing.
52
Do not use the lower anchorage system
(LATCH system) to attach this child restraint
when restraining a child weighing more
than 40 lbs (18 kg) with the internal
harnesess of the child restraint.
