Securing Infant in Car Bed
1.
Unbuckle Harness
Press in towards the
top
of the red
button.
Pull buckle tongues out.
Place harness straps and buckle
strap out of the way.
3
4
2.
Place Infant in Car Bed
5.
Buckle Harness
Fit top buckle plate over bottom
buckle plate.
Hold buckle tongues with one
hand and buckle with the other.
Push buckle tongues into buckle
until you hear a “click.”
3.
Position Harness Straps
Over Shoulders
6.
Check Harness and
Buckle Strap Lengths
The buckle should lay at mid-
chest (even with armpits) and
away from the infant’s neck.
Try to pinch the harness at the
shoulders vertically between
index finger and thumb as
shown.
If your fingers slip off
, the
harness is tight enough.
4.
Pull Buckle Strap Up
Between the Legs
TOP
BOTT
OM
Always secure infants on their backs unless your doctor advises
you to place the infant on their stomach.
If you can pinch the harness strap
, you will need to tighten
the harness strap.
continued on next page.
4358-6748 Dream Ride LATCH.indd 7-8
4358-6748 Dream Ride LATCH.indd 7-8
4/7/15 4:48 PM
4/7/15 4:48 PM
