XXXXX
36
2.
Adjust Headrest to
Highest Position and
Remove Body Pillows
4.
Route Lower Anchor
Belt Through Rear-
Facing Belt Path
Do not twist belt.
The lower anchor belt adjuster
can be on either side.
3.
Undo Fasteners on Seat
Pad and Pull Easy Belt
Access Panel Down
5.
Pull Lower Anchor Belt
Across to Opposite Side
Do not twist belt.
Belt
MUST
be in
front
of buckle
strap. You
MUST
use the 1st or
2nd buckle slot.
Do not
place belt
over child’s legs.
continued on next page
35
9.
Place Child Restraint
Rear Facing in Back
Seat
For children who cannot sit up
unassisted,
the level line on shell
MUST
be parallel with the ground
using either position
3 or 2
.
For children who can sit up
unassisted,
you may rotate the
child restraint to be more upright.
8.
Recline the Child
Restraint
Pull out on recline handle and push
top of child restraint back.
6.
Finished Lower Anchor
Belt Routing
7.
Replace Easy Access
Belt Panel
Attach seat pad fasteners and put
body pillows back in seat.
Adjust the headrest/harness to
the proper height for your child
.
See page 5 for fi t guidelines.
4358-6835 Grow and Go Air.indd 41-42
4358-6835 Grow and Go Air.indd 41-42
10/29/15 3:33 PM
10/29/15 3:33 PM