Attach Lower Anchor Belt
Connectors to Vehicle’s
Lower Anchors
On select models: Make sure the arrows on the
connectors are facing up.
Fasten one lower anchor belt connector to the
anchor located in the vehicle seat.
Repeat for other side of car seat.
Locate
Rear-Facing Belt Path
& Route
Vehicle Belt or Lower Anchor Belt Through It
Vehicle Belt or Lower
Anchor Belt Goes:
•
under the car seat pad;
AND
•
across the car seat;
AND
•
in front of the buckle;
AND
•
out the other
Rear-Facing
Belt Path
opening.
DO NOT twist the belt.
Buckle Vehicle Belt
If your car has a
switchable
retractor,
use it to lock the
vehicle belt. Review page
57 of this manual or your
vehicle owner’s manual.
For the LATCH belt:
You may need to fully lengthen the belt before
routing it into the belt path. Squeeze the adjuster button and pull the belt
out as shown.
Thread the connector without the adjuster closest to it through the
Rear-
Facing Belt Path
opening as shown.
continued on next page
13
14
Finished Lower
Anchor Belt
Routing
The lower anchor
belt adjuster
MUST
be on the child’s
right.
3
OR
5
4
OR
Adjuster