The sewn ends of the
harness strap loops
MUST
face towards you.
DO NOT
twist the harness
strap or the harness
adjustment strap.
Make sure the same
harness strap loops are
fi tted completely on both
sides of the splitter plate.
47
48
To return the harness straps to upper shoulder harness slots, follow the steps below
to rethread them.
1.
Remove Harness Strap Loops From Splitter Plate & Pull Harness Straps Out of Lower
Shoulder Harness Slots in Back Body Pillow & Car Seat
If harness straps have been
removed from chest clip &
buckle, rethread them:
The harness strap ends go
through the
back
of the buckle
tongues & through the chest clip
front to back
.
2.
Thread Harness Straps into
Upper Shoulder Harness Slots
in Seat Pad & Car Seat
3.
From Back of Car Seat,
Thread Harness Straps
Over
Metal Bar
4.
Attach 1st Harness Strap
Loops to Splitter Plate
sewn
end
4
Pull Back Body Pillow
Forward Away from
Car Seat
Thread the harness straps
through the slots in the back
body pillow, the lower shoulder
harness slots in the seat pad,
and the car seat.
5
From Back of Car
Seat, Pull Harness
Straps Through
Car Seat
The harness straps
MUST
be in the shoulder harness
slots
below
the metal bar.
6
Attach 2nd Harness
Strap Loops to
Splitter Plate