Harness System Adjustments
for Smaller Infants
15
continued on next page
16
With Buckle in the
1st Slot As Shown,
Turn the Seat Over
If you need to move the buckle
to the 1st slot, see pages 13-14.
Release Elastic Straps
From Tabs on Bottom of
Shell and Pull Seat Pad
Off the Front of the Shell
1
2
sewn
end
1
2
From Back of Seat,
Remove Harness Strap Loops
From Splitter Plate
Attach 2nd Harness Strap
Loops to Splitter Plate As
Shown
Sewn ends of the harness strap loops
must
face towards you.
Do not
twist harness strap or harness
adjustment strap.
Make sure the same harness strap
loops are fitted
completely on
both
sides of the splitter plate.
Harness strap loop ends
must
go
through the recline stand as shown.
Harness adjustment strap
must
lie
under the harness strap as shown.
Check your child’s fit often.
To learn how to check harness
tightness, see pages 48-50.
If you cannot achieve a snug harness fi t for your child, you may
need to adjust the harness strap and/or buckle strap length as
shown in this section.
Adjusting Harness Strap
Adjusting Buckle Strap
Recline Stand
Harness Adjustment
Strap