43
44
Vehicle Belt Installation with Base
Safety Tips
Make sure harness and buckle fit your child correctly before
installing the child restraint. See pages 4-5.
WARNINGS:
Do not use the lower anchor belt along
with the vehicle lap or lap/shoulder belt. Secure lower
anchor belts to storage attachments in base when using
the vehicle belts.
Check vehicle belt before each use. Use only if the belt can
be tightened properly and locked securely in place.
Only use this car seat with a compatible onBoard 35 LT
base. Failure to use a correct base can cause serious
injury or death.
Failure to follow these warnings can result in serious
injury or death.
1.
Store Lower Anchor
Belt
2.
Place Base in Vehicle
Rear Facing
Center the base in the chosen
seating position.
3.
Route Vehicle Lap or
Lap/Shoulder Belt
Through Base Belt Path
Review pages 35-36 and your
vehicle owner’s manual to
determine what kind of vehicle
belts you have and how to lock a
child restraint in place.
4.
Buckle Vehicle Belt
5.
Tighten Belt
Place hand in base. Firmly push
base down and back towards the
vehicle seat back while pulling
free end of belt to tighten.
continued on next page