1
2
1
2
1
2
1
2
11
Pull Seat Pad Off
Front of Car Seat &
Place Car Seat
Rear-Facing
in
Back Seat
The car seat base
MUST
be
flat on the vehicle seat.
2
Locate
Rear-Facing
Belt Path
& Route
Vehicle Belt or
Lower Anchor Belt
Through It
For the LATCH belt:
You
may need to fully lengthen
the belt before routing it
into the belt path. Squeeze
the adjuster button and pull
the belt out as shown.
1
2
3
OR
For children
who cannot sit up
unassisted
, the
Rear-Facing Level Line
on the car seat
MUST
be parallel with the
ground using either
Position 3 or 2
.
For children
who can sit up unassisted
,
you may make the car seat more upright
in
Position
2
.
1
2
Pull the entire lower anchor
belt over to the child’s right
as shown.
Then route the hook
on the
adjuster end
through the
Rear-Facing Belt Path
.